Request Service
We typically reply within a few minutes during regular business hours.
Washing Machine Does Not Fill With Water – NF Error
Technically Reviewed by Oleg Chudnovski on Nov 06, 2025 | Written by Spark Service PRO Editorial Contributors
What you’ll find in this service repair guide
- Washing Machine NF (No Fill) Error Troubleshooting Guide
- A Very Common Error for Brands like Samsung, Speed Queen, Kenmore, Maytag and LG
- Water is turned on
- Filter is clogged with debris
- Door or lid switch problems
- Water inlet hoses
- Water inlet filters are clogged
- Water pressure issues
- Water inlet valve issues
- Same-day Washing Machine Repair Services in Toronto and the Greater Toronto Area (GTA)
- FAQ: Common Questions Asked About NF Error
The washing machine is one of the most necessary laundry appliances nowadays. None of the housewives can imagine a daily routine without it as it helps save time, energy, and health. It goes without saying that when your washer is malfunctioning, this makes you irritated and frustrated.
The NF Error on a washing machine often signals problems with the water supply. It can stem from issues like low water pressure caused by clogged filters or kinked hoses. Another culprit could be malfunctioning inlet valves that fail to open properly. However, it’s worth noting that other factors might also be at play, such as electronic glitches or sensor malfunctions within the machine.
Here, our skilled washing machine technicians at Spark Service PRO prepared the troubleshooting tips when you face one of the most common problems – “nF” error displayed on your washer. This error is the most common if you have Samsung, Speed Queen, Kenmore, Maytag or LG washing machines.
Washing Machine NF (No Fill) Error Troubleshooting Guide
| Issue | Possible Parts Replacement | Solutions |
|---|---|---|
| Water Supply Issue | Inlet Valve | 1. Ensure that the water supply valves are in the “on” position. |
| Water Inlet Hose | 2. Inspect and clean inlet hose filters. | |
| Inlet Valve Solenoid | 3. Test the inlet valve solenoid for continuity. Replace if faulty. | |
| Blocked Inlet Screen | Inlet Valve | 1. Remove the inlet valve and clean the screen/filter if clogged. |
| 2. Check hoses for kinks or blockages. | ||
| Faulty Pressure Switch | Pressure Switch | 1. Test the pressure switch for continuity. Replace if it doesn’t function properly. |
| Faulty Control Board | Control Board | 1. Inspect the control board for visible damage or burnt components. Replace if necessary. |
| Sensor Issues | Water Level Sensor | 1. Test the water level sensor for continuity. Replace if faulty. |
| Faulty Wiring | Wiring and Connectors | 1. Inspect wiring and connectors for damage. Repair or replace as needed. |
| Low Water Pressure | Pressure Regulator Valve | 1. Check household water pressure. Install a pressure regulator valve if the pressure is too low. |
| 2. Ensure the water supply line is not obstructed. | ||
| Drain Hose Position | Drain Hose | 1. Make sure the drain hose is positioned correctly. It should not be submerged or kinked. |
| Programming Error | Control Panel/Settings | 1. Review the user manual for correct settings and run a different cycle. |
| Water Inlet Valve Wiring | Wiring and Connectors | 1. Check wiring connections to the water inlet valve. Repair or replace damaged wires. |
Please note that this is a general troubleshooting guide, and specific washing machine models may have variations in their components and diagnostics. Always refer to the manufacturer’s documentation for your particular model for the most accurate information and instructions. If you’re not comfortable performing these repairs yourself, it’s advisable to contact a qualified technician of Spark Service PRO for assistance.
Book Online and Save $30
fixappliances.ca
1-888-242-0777
Use Coupon →
fixappliances.ca
1-888-242-0777
Use Coupon →
A Very Common Error for Brands like Samsung, Speed Queen, Kenmore, Maytag and LG
NF error means “No fill” indicating the washing machine cannot safely fill with water. An nF code appears on the display when your washer has spent over 15 minutes trying to fill itself up without success.
Upon the experience of our experts, this nF code does not mean severe damage to your appliances and can be fixed within several minutes. In this case, the main task is to identify why it happened. Let’s look at some of them:
- Water is turned on. Confirm if the water supply to the washing machine is activated. Typically, the washing machine necessitates both the hot and cold water supply valves to be opened. Ensure these valves are fully unlatched.
- The filter is clogged with debris. If your Samsung or Speed Queen washing machine has a debris filter, clean out the filter with soap and water and return it to the washer. This may resolve the nF error code.
- Door or lid switch problems. At times, it may fail to fill with water if the door isn’t shut properly. The door switch (for front-loaders) or lid switch (for top-loaders) signals the control panel or timer to initiate water filling once the door is securely shut. Even if the door closes correctly, there could still be an issue with the door or lid switch.
- Water inlet hoses. From time to time, water supply hoses may twist or fold, triggering the nF error code. Unfurl the hose if it obstructs the water flow to the washer.
- Water inlet filters are clogged. The majority of washers are equipped with filters situated where the water inlet hoses link to the machine. Clogged filters could result in an “nF” error. Switch off the water inlet valves and detach the hoses from the washer to inspect the filters. Identify the filters and assess whether they are obstructed. Depending on the washer model, you might require needle-nose pliers to extract the filter. Rinse the filters with water, employing a brush to eliminate any debris.
- Water pressure issues. As a rule, most washer models require water pressure between 30 and 120 psi. If the water pressure is below 30 psi, the washer will not receive enough water, and this will cause the nF error code.
- Water inlet valve issues. After verifying the potential causes outlined above for the nF error code, it’s possible that the water inlet valve’s solenoid is faulty. Over time, the solenoid coils within the inlet valve may deteriorate. Employ a multimeter to examine the solenoids for continuity. If the continuity test for the coil yields negative results, it indicates that the water inlet valve requires replacement.
NB: Before accessing the washing machine, ensure to disconnect the power and shut off the water supply. In the event of an NF error code, the potential issues could range from a complete blockage in the valves, a malfunctioning valve, a broken wire between the electronic control board and the water valves, or a defective electronic control board.
If troubleshooting fails to resolve the error on your washer, it is advisable to seek assistance from a professional appliance repair technician who specializes in addressing appliances exhibiting an NF error code. Spark Service PRO is an authorized appliance repair company for brands like Panasonic, Blomberg, Fulgor Milano and all LG appliances. Our technicians are familiar with a washer NF error code and can perform your repairs at your convenience!
Same-day Washing Machine Repair Services in Toronto and the Greater Toronto Area (GTA)
Spark Service PRO has approximately twenty years of experience providing washing machine repair services all over Toronto, Ottawa and other GTA areas. Our experts are factory-trained, certified, skilled, and trustworthy technicians whose excellent work has been admitted by thousands of positive customer reviews, including Google and many social media platforms such as Yelp, Reddit, Facebook, and others. We are proud of being a 7-times-winner of HomeStars Best. Moreover, Spark Service PRO has been a HomeStars Best of the Best winner 2-times in a row.
We are available seven days a week from 7:30 a.m. to 9:00 p.m., including weekends and holidays. Call us for NF Error code appliance repair service toll-free number 888-242-0777 or request a quote today.
Date of page creation: August 28, 2023
Page update date: November 06, 2025
Share
Frequent Asked Questions
What does the NF error code on my washing machine mean?
The NF error code indicates No Fill error, which means your washing machine is not receiving water as it should during the selected cycle. It's a common issue that can result from various causes.
Can I fix the NF error issue on my washing machine myself?
Depending on the cause, some NF error issues can be resolved by homeowners with basic DIY skills, such as checking water supply valves and cleaning inlet screens. However, for more complex issues like electrical component failures, it's advisable to seek professional repair assistance.
How can I determine if the water inlet valve is the problem?
To check if the water inlet valve is causing the NF error, you can perform a simple test. Disconnect the hoses and inspect the valve screens for blockages. Additionally, you can test the solenoids for continuity using a multimeter. If these tests indicate issues, it may be necessary to replace the inlet valve.
What should I do if I've tried troubleshooting but the NF error persists?
If you've attempted the troubleshooting steps in the guide but the NF error continues to display, it's best to contact a qualified appliance repair technician. They can perform a more thorough diagnosis, identify the precise issue, and carry out the necessary repairs or parts replacements to resolve the problem efficiently.
Is it cheaper to repair or replace a washing machine?
A relatively new washer may not break down on a regular basis, hence it may be more affordable to repair it. Getting replacement parts for modern machines can be easier than finding components for older models. We recommend the washing machine repair only when the repair cost is less than 50 percent of a new machine's price
How many years should a washing machine last?
A typical washer should last 10-13 years. Top-loading washers typically last a few years longer than their front-loading brethren. If you use a stacked washer/dryer combo, you may have to replace both if one starts acting up.
Ask a Question
Follow us
PROFESSIONAL APPLIANCE SERVICE
Factory Certified
TSSA Gas Contractor
Complete Warranty
Authorized Repair
Book Quick Appliance Repair
Need it today? Schedule now for fast, reliable appliance repair service.
Popular articles
CONTACT US
Schedule an appointment or request an estimate:
Repairs and Installations:
647-503-6655
Parts Department:
800-379-9451
Fax:
877-861-8475
E-mail:
info@sparkservice.pro
Please provide us with your make, and model number, a brief description of the problem and any other details available.
We accept online service requests sent through the quick order form 24/7.
If you send your request outside our regular business hours, our representative will contact you first thing in the morning.
REQUEST SERVICE
We are open 7 days a week for your convenience!
To book an appointment or get an estimate, please complete the form below, or call us. We will contact you to confirm. Usual reply time: 3 minutes.
To book an appointment or get an estimate, please complete the form below, or call us. We will contact you to confirm. Usual reply time: 3 minutes.
We typically reply within a few minutes during regular business hours.