Promo Code Today: Book Online and Save $35

What Does EC Mean On a Dehumidifier?

Igal Geiler

Technically Reviewed by Igal Geiler on Apr 01, 2024 | Written by Igal Geiler

Several users of the Frigidaire dehumidifier are confused about the EC code and don’t know what it means.

The EC code indicates a Frigidaire dehumidifier troubleshooting of the sealed system, which consists of critical components and how it works to provide air. Fortunately, some solutions will help you to fix the device.

What Does EC Mean On a Dehumidifier?

The EC code on dehumidifier indicates a problem with the appliance’s sealed system, which causes it to shut down.

How Does Frigidaire Dehumidifier EC Code Appear?

The sealed system consists of the components that circulate throughout the entire system:

  • compressor;
  • condenser coils;
  • evaporator;
  • refrigerant.

The Frigidaire dehumidifier EC code occurs due to problems with the condenser coils. However, the manufacturer doesn’t define this issue. It could be unclean, clogged coils, or frozen ones due to a lack of refrigerant in the system.

The reason is not the same for such breakage, but it happens when a poor seal in the system enables refrigerant to leak.

How to Identify a Refrigerant Leak?

When refrigerant breaks off, it looks damp, smells pungently sweet, and makes an irritating noise. Being exposed to higher levels of refrigerant is likely to cause headaches, dizziness, or nausea. However, if you identify any of these symptoms while your dehumidifier is emitting these odors, remove it from your house immediately.

Moreover, refrigerant is flammable. Therefore, based on the amount of odors it has leaked, smoking or bringing open flames near a leak can be quite dangerous.

What to Do When the Frigidaire Dehumidifier Error Code EC Appears?

How to Reset a Dehumidifier?

Resetting your dehumidifier is an effective way to clear an error caused by a short-term bug or issue. It can be as simple as pressing a button on the touchpad if one is given. If the device isn’t supplied with a reset button, you can unplug it from the wall outlet and wait for half an hour before switching it on to make sure the error code is cleared.

This advice can be useful, but it is usually temporary. So, if the error appears again, you are to look into alternative methods to fix the dehumidifier.

How to Clean the Frigidaire Dehumidifier Bucket?

Sometimes the Frigidaire dehumidifier not working due to the dirty water bucket. That is why, you should clean it periodically. Follow the step-by-step guide to make it properly:

  1. Remove the uncleaned water from the device into a kitchen or utility sink.
  2. Rinse the bottom, with a couple of cups of warm water and mild dish soap.
  3. Apply a sponge to clean the interior of the tank properly.
  4. Rinse the soap away and treat the tank with a certain spray for cleaning dehumidifiers.
  5. Wipe the bucket with a dry cloth.
See Also  Miele Dishwasher Circulation Pump Repair Issues

This guide will help to cleanse the reservoir and keep mold, gems, and mildew from appearing in your dehumidifier bucket.

How to Clean Filter on Frigidaire Dehumidifier?

The filter is placed behind the grate on the dehumidifier’s exterior. The way you access the filters per model.

The Frigidaire dehumidifier filter cleaning is quite simple. Cleaning the filter helps to eliminate obstructions in your dehumidifier. Brush your vacuum’s bristles over the filter. If it is extremely dirty, moisten a clean towel with warm water and lather with a few drops of mild dish soap.

To remove any obstinate particles, wet the filter with warm water and wipe it clean. Rinse the filter with cold water and place it in a well-ventilated area to air-dry entirely.

How to Use Frigidaire Dehumidifier?

Whether you can solve the EC error code with a hard reset or you have a new device and wish to avoid future problems, there are some useful tips. You can follow them to extend the life of the sealed system and condenser coils and prevent errors.

Clean the Frigidaire Dehumidifier Regularly

Giving your device and its filter a fast vacuum, ducting, or wipe-down can have a significant impact on its overall function. If the present filter is dirty and needs to be replaced, you can call an appliance expert to make it.

Keep It Ventilated

Users frequently place their dehumidifier in a corner or against a wall, causing it to become ineffective. It is critical to ensure that it has enough area for pulling and pushing air safely.

Check if the Device is Within Warranty

If the dehumidifier you’re using is relatively new, your best option is to contact Frigidaire and verify if it is still under warranty. Otherwise, hiring a specialist is unlikely to be cost-efficient because dehumidifiers are generally inexpensive appliances. The technicians can explain to you why is the Frigidaire dehumidifier compressor not running.

Some users may be interested do dehumidifiers use freon. To tell you the truth, all dehumidifiers contain freon, which may also cause problems. To make it work, you may call an appliance expert to fill the freon if there is a lack of it in the device.


Prevention is better than treatment, and keeping your Frigidaire dehumidifier in good working order is the best way to avoid error codes. Make sure to follow the manufacturer’s instructions for how frequently your Frigidaire dehumidifier filter resets.

If you don’t use this appliance regularly, remove the water tank after each usage, even if it isn’t full. Leaving water in the refrigeration system for an extended period creates an atmosphere conducive to bacteria and mold growth.

Date of page creation: March 03, 2024

Page update date: April 01, 2024

Ask a Question

Leave a Reply

Your email address will not be published. Required fields are marked *


 Factory Certified

Factory Certified

TSSA Gas Contractor

TSSA Gas Contractor

Complete Warranty

Complete Warranty

Authorized Repair

Authorized Repair

You might also like

How to Fix the LG Dishwasher CL Code?

How to Fix the LG Dishwasher CL Code?


Several LG dishwasher users have stuck with the CL error code and don’t understand how to fix it. So, let’s find out ...

Expert Installation of a High-Efficiency 2-Ton Maytag Air Conditioner in Toronto

Expert Installation of a High-Efficiency 2-Ton Maytag Air Conditioner in Toronto


Repairing the Malfunctioning Air Conditioner or Purchasing a New, More Efficient Unit On a hot July day, when the he...

What Does Ub Mean on Samsung Washer?

What Does Ub Mean on Samsung Washer?


Sometimes, Samsung washer users are stuck with the Ub and Ur error codes. They are the same, meaning the load is imba...